Your one-stop for all things SCUBA (224)333-0800

ST ELITE TRAVEL SYSTEM

ST ELITE TRAVEL SYSTEM

$899.95

Availability: In Stock

Part Number:208.8003.022 Manufacturer: HOLLIS Size: M/L

HOLLIS ST ELITE TRAVEL SYSTEM 

The Hollis ST Elite System combines the Hollis most popular single tank components into one, including the Elite 2 harness for the ultimate in features and comfort in a backplate and harness system. For warm water and travel destinations Hollis offers the ST Elite Travel, which includes the ST22 wing, Aluminum Backplate 2.0, Delrin cam bands and Backplate Back Pad 2.0. The ST22 is designed for warm water dives in aluminum cylinders, where low lift and maximum streamlining is preferred. The Elite 2 Harness System offers you all the features of a technical harness with the added comfort that recreational divers look for. The harness has adjustable shoulder and sternum straps equipped with squeeze-style side-release buckles for easy donning and doffing. The shoulder straps also incorporate adjustable and removable shoulder pads with 3-adjustable stainless-steel pre-bent D-rings on each shoulder for accessory attachment. The Hollis Elite 2 Harness has a stainless-steel latch-style waist buckle. All hardware is manufactured from 316-marine-grade stainless-steel. There are 2-additional stainless-steel D-rings on the waist strap for additional rigging requirements. The Hollis Elite 2 Harness System weights 1.7 lbs. (770g).

The Hollis ST line of wings are a series for single tank diving. The design features a 360 Degree tapered profile, to increase lift towards the hips, promoting better horizontal trim in dive position while still allowing perfect surface floatation. Tank slots and tank cradle are included on both models, which allows you to connect your wing and backplate without the need for a single tank adapter plate. This reduces weight and unnecessary accessories while traveling.

The bladder is a two-piece design, with a rugged 1680 Cordura nylon outer shell to prevent abrasion and punctures, and a 420-denier nylon internally urethane laminated with radio frequency (RF) welded seam inner bladder to maintain the buoyancy. The lower OPV is easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to. Both ST wings come standard with 3/8" threaded quick disconnect inflator hose. Welded flange and one-piece retainer for servicing without the need for tools. Elbow offset to avoid tank valve/regulator interference and streamlined hose routing. The ST22 provides 22 lbs. (10 kg) of lift.

The Hollis 2.0 Backplate Line is the foundation for the new Hollis technical harness systems. They feature improved ergonomics for a more comfortable fit, but are still short enough to fit smaller frame divers. The aluminum version weighs in at 1.5 lbs. (680 g), it is laser cut and CNC bent, which give this awesome new appearance. The Aluminum backplate is laser cut from EN AW 6061 aluminum and hard anodized in black for a marine grade finish. Geometry of the webbing slots is similar to Hollis prior design to ensure reverse compatibility for all Hollis buoyancy accessories, so if you have a current Hollis harness, wing or weight system, this new plate will fit. Aluminum plate is 0.12" (3mm) thick.

Being a technical diver does not mean you have to uncomfortable when you are diving. Add some cushion and comfortable support to your back plate with this Hollis Back Plate Back Pad. The Hollis Backplate Back Pad 2.0 is a comfortable two-piece design with added lumbar support, which easily pivots out of the way of your doubles tank bolts and cam bands when assembly or disassembly as needed. Sold as an accessory but also included with Hollis new Technical Harness systems. Note: Is not compatible with previous generation Hollis's back plates. Pad is constructed of sturdy and durable nylon and foam with sewn edge tape making your dive a more comfortable experience. The Hollis Delrin cam band assemblies are constructed from 2" (5cm) wide durable nylon webbing with a box stitched Delrin plastic cam buckle and is equipped with a wire cam for extra strength.

FEATURES

  • Complete Harness & Backplate
  • Back Inflation BCD
  • Cam Bands & Pack Pad
 
Elite 2 Adjustable Harness System:
Great for Tech or Recreational Diving
Adjustable Shoulder & Sternum Straps: Equipped w/Squeeze-Style Side-Release Buckles
Stainless Steel Latch-Style Waist Buckle
Easy Donning & Doffing
Adjustable & Removable Shoulder Pads
3-Adjustable Stainless-Steel Pre-Bent D-Rings On-Each-Shoulder
2-Stainless-Steel D-Ring On-Waist-Strap
Plenty of Room for Accessory Attachment
All Hardware Manufactured from 316-Marine-Grade Stainless-Steel
Weight: 1.7 lbs. (770 g)
 
ST Wing:
New Series for Single Tank Diving
Available-In Multiple Lift Capacities
Rugged 1680 Cordura Nylon Outer Shell
Shell: Prevent Abrasion & Punctures
 
Bladder:
420-Denier Nylon
Internally Urethane Laminated
Radio Frequency (RF) Welded Seams
OPV: Easy to Reach for Venting Gas while Horizontal or Heads Down
 
Hollis Power Inflator System:
Durable Impact Resistant Plastic w/Corrugated Rubber Hose
Internal Components & Inlet Quick-Disconnect Nipple:
Corrosion Resistant Chrome Plated Brass
3/8" Threaded Low-Pressure QD Hose
360 Degree Tapered Profile, Increase Lift Towards Hips
Design Promotes Better Horizontal Trim In-Dive Position
Perfect Surface Floatation
 
Tank Slots & Cradle:
Allows Single Tank Dive w/o Need for Single Tank Adapter
Reduces Weight & Unnecessary Accessories In-Traveling
Off-Set Elbow to Avoid Tank Valve/Regulator Interference
Streamlined Hose Routing
Welded Flange & 1-Piece Retainer for Servicing w/o Need for Tools
Lift Capacity: 22 lbs. (10 kg)
 
ST22:
For Warm Water & Travel Destinations
Aluminum Cylinders
Low Lift & Maximum Streamlining Preferred
 
Backplate:
Foundation for Hollis Technical Harness Systems
Improved Ergonomics for More Comfortable Fit
Short Enough to Fit Smaller Frame Divers
Laser Cut & CNC Bent
Awesome New Appearance
Weight: 1.5 lbs. (680 g)
Material: EN AW 6061 Aluminum
Finish: Hard Anodized, Black Marine Grade
Plate Thickness: 0.12" (3mm)
 
Back Plate Back Pad 2.0:
Increased Dive Comfort
Comfortable Two-Piece Design
Added Lumbar Support
Easily Pivots Out of Way of Doubles Tank Bolts & Cam Bands
Pivot Feature: Great for Assembly or Disassembly-As-Needed
Durable Long-Lasting Construction
Nylon w/Foam Padding
Sewn & Taped Edges for Added Strength
 
Delrin Cam Bands:
Soft Tank Band & Cam Buckle
Durable 2" (5 cm) Nylon Webbing Strap
Buckle Box Stitched On-Webbing for Strength & Durability
Delrin Plastic Buckle w/Wire Cam
 
60 Month Limited Warranty

0 reviews for ST ELITE TRAVEL SYSTEM

Write a review

re-CaptchaCan't read? Reload
Top